dot dot
bulletรายการประกอบตู้ MODULE


รหัส : FSP-851
ยี่ห้อ : NOTIFIER
ไฟล์เอกสาร : fsp-851.pdf
รายละเอียดย่อ :
NOTIFIER 851 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors.
รายละเอียดทั้งหมด :

NOTIFIER 851 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with decade address switches, providing exact detector locations for selective maintenance when chamber contamination reaches an unacceptable level. The FSP- 851 photoelectric detector’s unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. Dual electronic thermistors add 135°F (57°C) fixed-temperature thermal sensing on the FSP-851T. FSP-851 and FSP-851T detectors are compatible with all NOTIFIER intelligent Fire Alarm Control Panels (FACPs).

FlashScan® (U.S. Patent 5,539,389) is a communication protocol developed by NOTIFIER Engineering that greatly enhances the speed of communication between analog intelligent devices and certain NOTIFIER systems. Intelligent devices communicate in a grouped fashion. If one of the devices within the group has new information, the panel’s CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of earlier designs.


  • Sleek, low-profile design.
  • Addressable-analog communication.
  • Stable communication technique with noise immunity.
  • Low standby current.
  • Two-wire SLC connection.
  • FlashScan® (NFS-640, NFS-3030, AFC-600) and classic CLIP system (AFP-100, AFP-200, AFP-300, AFP-400, AFC-600, NFS-640, AFP1010, AM2020, and NFS-3030) compatible.
  • Rotary, decimal addressing (1 – 99 on current classic systems,1 – 159 on FlashScan® systems).
  • Optional remote, single-gang LED accessory (RA400Z).
  • Dual LED design provides 360° viewing angle.
  • Visible bicolor LEDs blink green every time the detector is addressed, and illuminate steady red on alarm.
  • Remote test feature from the panel.
  • Walk test with address display (an address of 121 will blink the detector LED: 12-(pause)-1) (FlashScan® systems only).
  • Built-in functional test switch activated by external magnet.
  • Built-in tamper-resistant feature.
  • Sealed against back pressure.
  • Constructed of off-white Bayblend®, designed to commercial standards, and offers an attractive appearance.
  • 94-5V plastic flammability rating.
  • SEMS screws for wiring of the separate base.
  • Optional relay, isolator, or sounder bases.
  • Listed to UL 268.
  • Backward-compatible.

จำนวน      ชิ้น

Copyright © 2010 All Rights Reserved.